51300C
MSRP: $132.00 each filter
Collections: Parts and Filters for Bottle Filling Stations, Replacement Filters for Bottle Filling Stations, Shop all, Water Filtration
In-Stock. Order by 3pm EST for Same Day Shipping.
The Elkay WaterSentry Plus 51300C is a carbon block filter designed to be used with ezH20 Bottle Filling Stations, Liv Pro Water Dispensers, and WaterSentry EWF3000.
**This is the appropriate model for the Elkay LZS8WSLP filter replacement and other popular ezH2O products including but not limited to:
This Elkay water filter has a 3000 Gallon (on avg. 1 year) capacity and is certified for Lead, Chlorine Taste & Odor and Class 1 Particulate reduction.
Easy to replace, the Elkay WaterSentry Plus 51300C is equipped with Quick-Disconnect, 1/4 turn installation and an inlet shutoff valve that closes when the filter is removed.
SPECIAL NOTE |
To be used with Elkay EZh20 Bottle Filling Stations |
51300CCAPACITY |
3000 Gallons or on avg. ~ 1 year |
TYPE |
Filtration for Bottle Filler |
DIMENSIONS |
L: 3-1/8" W: 3-1/8" H: 9 1/2" |
SHIPPING WEIGHT |
2 lbs |
Elkay51300C PRODUCT COMPLIANCE |
|
Q: How long do the 51300C Filters last?
A: Each 51300C Filter has a capacity of 3,000 Gallons, which is equivalent to approximately 19,200 20 oz. bottle fills. The average filter lasts about 6 months. It is recommended to leave in the filter no longer than 12 months even if the status light has not yet turned.
Q: What does the 51300C filter remove from water?
A: This Elkay is NSF certified to remove Lead, Chlorine Taste & Odor and Class 1 Particulate reduction.
Q: Do the filters have a shelf life?
A: The filters do not have a shelf life, but they should be stored somewhere protected from moisture.
Q: How hard is it to change a filter?
A: Changing a filter is fairly easy. There is NO NEED to turn off the water. Simply twist the used filter with a one fourth turn and replace with the new filter cartridge.
When filter status light turns to red, the filter needs to be changed. Follow these steps:
1) Remove the bottom access panel.
2) Unplug unit
3) Unscrew old filter
4) Install new WaterSentry Plus filter.
5) Reset filter light back to green by removing top cover and pressing the black reset button. Select reset filter. The light should appear as green. Detailed instructions on filter light reset are included in produce package.
MANUFACTURER'S RECOMMENDED USE CONDITIONS
Flow Rate Maximum : 1.5 GPM (5.6 L/ M IN.).
Water Temperature: 40- 100°F (4- 38°C).
Filter Capacity: 3000 gal. (11356 L) or on avg. ~1 year.
Initial Pressure Drop: 2-5 PSI (14-34 KPa).
Line Pressure Maximum: 105 PSI (724 KPa).
Line Pressure Minimum: 20 PSI (138 KPa).
*ASSEMBLED IN THE UNITED STATES.